Nikon D80 Manual De Usuario
38
Reference: More on Photography (All Modes) / Choosing a Shooting Mode
Using a Remote Control
Use the optional ML-L3 remote control for self-portraits ( 123) or to operate the camera
remotely.
remotely.
Before Using the Remote Control
Before using the remote control for the fi rst time, remove the clear plastic battery insulator sheet.
1
Mount the camera on a tripod or place the camera on a stable, level surface.
2
Press the button to select one of the following modes:
Mode
Delayed remote
Shutter released about 2 s after remote shut-
ter-release button is pressed.
ter-release button is pressed.
Quick-response
remote
remote
Shutter released when remote shutter-release
button is pressed.
button is pressed.
The camera will enter stand-by mode. At default settings, single frame or continuous
shooting mode will be restored if no operations are performed for about a minute.
shooting mode will be restored if no operations are performed for about a minute.
3
Frame the photograph. If autofocus is in eff ect, the camera shutter-release button can
be used to set focus, although only the shutter-release button on the remote control
can be used to release the shutter.
can be used to release the shutter.
4
In modes other than M, remove the viewfi nder eyepiece cup
and insert the supplied DK-5 eyepiece cap as shown. This pre-
vents light entering via the viewfi nder interfering with expo-
sure.
vents light entering via the viewfi nder interfering with expo-
sure.
5
Aim the transmitter on the ML-L3 at the infrared receiver on the
camera and press the shutter-release button on the ML-L3. In
delayed remote mode, the self-timer lamp will light for about
two seconds before the shutter is released. In quick-response
remote mode, the self-timer lamp will fl ash after the shutter has
been released. If AF-A or AF-S is selected in autofocus mode
camera and press the shutter-release button on the ML-L3. In
delayed remote mode, the self-timer lamp will light for about
two seconds before the shutter is released. In quick-response
remote mode, the self-timer lamp will fl ash after the shutter has
been released. If AF-A or AF-S is selected in autofocus mode
( 29), the camera will return to stand-by mode without releasing the shutter if unable
to focus. The camera will release the shutter without focusing in manual focus mode,
if AF-C is selected in autofocus mode, or if the camera has already been focused using
the camera shutter-release button (see step 3).
to focus. The camera will release the shutter without focusing in manual focus mode,
if AF-C is selected in autofocus mode, or if the camera has already been focused using
the camera shutter-release button (see step 3).
Remote control mode can be cancelled by selecting another shooting mode. Single-frame
or continuous shooting mode will be restored if the camera is turned off or no operations
are about one minute.
or continuous shooting mode will be restored if the camera is turned off or no operations
are about one minute.