Frigidaire FPEF4085KF Guía Del Usuario

25



If a 2 or 4 hour clean time is desired, press 2 0 0 for 2 

hours or press 4 0 0 for a 4 hours clean time. Set the 

cleaning time based on the amount of soil: Light, medium 

or heavy (*see above).



If a 2 or 4 hour clean time is desired, press 2 0 0 for 2 

hours or press 4 0 0 for a 4 hours clean time. Set the 

cleaning time based on the amount of soil: Light, medium 

or heavy.



Allow about 15 seconds for the oven door lock to close.

The selF clean pad controls the Self-Cleaning feature. 

If you are planning to use the oven directly after a self-

clean cycle remember to allow time for the oven to cool 

down and the oven door to unlock. This normally takes 

about one hour. So a 3 hour self-clean cycle will actually 

take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light 

soils, a 3 hour cycle for average soils, and a 4 hour cycle 

for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour Self-Cleaning cycle

1.  Be sure the clock is set with the correct time of day 

and the oven door is closed.

2.  Press selF clean. “CLn” and “3:00” HR will show 

in the display. The control will automatically clean for 

a 3 hour period (default self-cleaning cycle time).

3.  Press start. “door locked” and “CLEAN” will 

flash and the letters “CLn” will remain ON in the 

display.

4.  As soon as the control is set, the motor driven oven 

door lock will begin to close automatically. Once 

the door has been locked the “door locked” 

indicator light will stop flashing and remain ON. Also, 

the oven icon will appear in the display.

1.  “Hot” will appear in the display. The time of day, the 

“door locked” and “CLEAN” will remain in the 

display.

2.  Once the oven has cooled down for approximately 

1 HOUR, and the “door locked” is no longer 

displayed, the oven door can then be opened. 

If it becomes necessary to stop or interrupt a self-

cleaning cycle due to excessive smoke or fire in the oven:

1.  Press cancel.

2.  The oven door can only be opened after the oven 

has cooled down for approximately 1 HOUR, “door 

locked” is no longer displayed.

The selF clean and delaY start pads controls the 

Delayed Self-Clean operation. The automatic timer will turn 

the oven on and oFF at the time you select in advance.

1.  Be sure the clock is set with the correct time of day 

and the oven door is closed.

2.  Press selF clean. “CLEAN” will flash and 

“3:00” HR will show in the display. The control will 

automatically clean for a 3 hour period (default self-

cleaning cycle time).

3.  Press start. “door locked” and “CLEAN”

will flash and the letters “CLn” will remain ON in 

the display. The motor driven oven door lock will 

begin to close automatically. Once the door has been 

locked the “DOOR LOCKED” indicator light will quit 

flashing and remain ON.

4.  Press delaY start. Enter the desired start time 

using the number pads 4 3 0.

5.  Press start. “delaY”, “door locked” and 

“CLEAN” icons will remain ON.

6.  The control will start the self-cleaning at the set start 

time, for the period of time previously selected. At 

that time, the icon “delaY” will go out;  “cln” and 

oven icon will appear in the display.

1.  “Hot” will appear in the display. The time of day, the 

“door locked” and “CLEAN” will remain in the 

display.

2.  Once the oven has cooled down for approximately 

1 HOUR, and the “door locked” is no longer 

displayed, the oven door can then de opened. 

If it becomes necessary to stop or interrupt a self-

cleaning cycle due to excessive smoke or fire in the oven:

1.  Press cancel.

2.  The oven door can only be opened after the oven 

has cooled down for approximately 1 HOUR, “door 

locked” is no longer displayed.