Arturia cs-80v Manual De Usuario

Descargar
Página de 84
ARTURIA – CS-80V – USER’S MANUAL
 
55
 
The high-pass filter 
 
 
The  band-pass  (BPF) eliminates frequencies situated on either side of the cut-off 
frequency. It is in fact the addition of a low-pass and a high–pass filter. Use it to 
focus on a particular band of frequencies that you wish to emphasize. This will make 
the sound more «pinched». On the CS-80V, you obtain this type of filtering by 
combining the actions of a high pass filter and a low pass filter as there is technically 
speaking no separate band-pass filter.  
 
 
 
The band-pass filter 
 
A second setting to compliment the cut-off frequency: the resonance 
(you will also find it called «emphasis» or «Q» – for Quality of filtering) 
The resonance amplifies frequencies close to the cut-off frequency; the other frequencies 
remaining are either unchanged (before the cut-off frequency) or reduced (after the cut-
off frequency). 
You can increase the rate of resonance through the resonance slider. 
 
When you increase the resonance, the filter becomes more selective, the cut-off 
frequency is amplified, and the sound begins to «whistle».