Microtek vs1 Guía Del Usuario
Problem
The S-Video image source
does not appear.
does not appear.
Only the start-up screen
appears and not the image
from the image source.
appears and not the image
from the image source.
The image source is
connected but a No Signal
message appears.
connected but a No Signal
message appears.
Cause and Solution
Some inexpensive cables are not compatible
with the projector. Be sure to use the cable that
came with your projector.
with the projector. Be sure to use the cable that
came with your projector.
• Verify that the cables are connected correctly.
See “Connecting the Projector” on page 7.
• Verify that the proper image source is con-
nected and that it is selected on the Setup tab of
the menus.
the menus.
• Make sure that the image source is turned on.
• Turn off everything and power up again in the
proper order.
• Make sure that your laptop’s external video
port is turned on. See the computer manual for
details.
details.
• Verify that the cables are connected correctly.
See “Connecting the Projector” on page 7.
• Verify that the proper image source is con-
nected and that it is selected on the Setup tab of
the menus.
the menus.
• Make sure there are no bent pins in the
connectors.
• Make sure the image source is turned on.
• Turn off everything and power up again in the
• Turn off everything and power up again in the
proper order. See “Starting the Presentation”
on page 8.
on page 8.
• Make sure that your laptop’s external video
port is turned on. See the computer manual for
details.
details.
Image Source
LCD Projector User Guide
26
LCD Projector User Guide.p65
02-6-19, 14:07
26