Nortel 2526T Guía Del Usuario

Related publications

separator ( > )

Shows menu paths.

Example: Protocols > IP identifies the IP command
on the Protocols menu.

vertical line ( | )

Separates choices for command keywords and
arguments. Enter only one of the choices. Do not
type the vertical line when entering the command.

Example: If the command syntax is

show ip

{alerts|routes}

, you can either enter

show ip

alerts or show ip routes

, but not both.

Related publications

For more information about using the Ethernet Routing Switch 2500 Series,
see the following publications:

•

Nortel Ethernet Routing Switch 2500 Series Release Notes — Software
Release 4.1 (NN47215-400)

Documents important changes about the software and hardware that
are not covered in other related publications.

•

Nortel Ethernet Routing Switch 2500 Series Overview — System
Configuration (NN47215-500)

Describes the various management interfaces and how to use them
to configure basic switching features for the Nortel Ethernet Routing
Switch 2500 Series.

•

Nortel Ethernet Routing Switch 2500 Series Configuration — VLANs,
Spanning Tree, and MultiLink Trunking (NN47215-501)

Describes how to configure Virtual Local Area Networks (VLAN),
Spanning Tree Protocol (STP), and MultiLink Trunk (MLT) features for
the Nortel Ethernet Routing Switch 2500 Series.

•

Nortel Ethernet Routing Switch 2500 Series Configuration — Quality of
Service (NN47215-504)

Describes how to configure and manage Quality of Service features for
the Nortel Ethernet Routing Switch 2500 Series.

•

Nortel Ethernet Routing Switch 2500 Series Performance Management
— System Monitoring (NN47215-502)

Describes how to configure system logging and network monitoring,
and how to display system statistics for the Nortel Ethernet Routing
Switch 2500 Series.

Nortel Ethernet Routing Switch 2500 Series

Security — Configuration and Management

NN47215-505 (323165-B)

02.01

Standard

4.1

19 November 2007