Nortel 2526T Guía Del Usuario
Configuring SNMPv3
213
•
Click Yes to delete the target parameter configuration.
•
Click Cancel to return to the table without making changes.
—End—
Configuring an SNMP trap receiver
You can configure the IP address and community string for a new SNMP
trap receiver, view a table of existing SNMP trap receiver configurations, or
delete an existing SNMP trap receiver configuration(s).
trap receiver, view a table of existing SNMP trap receiver configurations, or
delete an existing SNMP trap receiver configuration(s).
ATTENTION
The SNMP Trap Receiver Table is an alternative to using the SNMPv3 Target
Table and SNMPv3 Parameter Table. However, only SNMPv1 traps are
configurable using this table.
Table and SNMPv3 Parameter Table. However, only SNMPv1 traps are
configurable using this table.
Creating an SNMP trap receiver configuration
To create an SNMP trap receiver configuration, use the following procedure:
Step
Action
1
From the main menu, choose Configuration > SNMP Trap.
The SNMP Trap Receiver page appears.
The following figure displays the SNMP Trap Receiver page.
Figure 72
SNMP Trap Receiver page
SNMP Trap Receiver page
The following table describes the fields on the Trap Receiver Table
and Trap Receiver Creation sections of the SNMP Trap Receiver
page.
and Trap Receiver Creation sections of the SNMP Trap Receiver
page.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.