Nortel 2526T Guía Del Usuario

Securing your system

default ssh [dsa-auth|pass-auth|port|timeout]

The

default ssh

command is executed in the Global Configuration

command mode.

Table 13 "default ssh command parameters and variables" (page
55)

describes the parameters and variables for the

default ssh

command.

Table 13
default ssh command parameters and variables

Parameters and
variables

Description

dsa-auth

Resets dsa-auth to the default value. Default is
True.

pass-auth

Resets pass-auth to the default value. Default is
True.

port

Resets the port number for SSH connections to the
default. Default is 22.

timeout

Resets the timeout value for session authentication
to the default. Default is 60.

Setting server for Web-based management

You can enable or disable the Web server to use for the Web-based
management system. This section discusses the following commands:

•

"web-server" (page 55)

•

"no web-server" (page 56)

web-server

The

web-server

command enables or disables the Web server that

you use for Web-based management. The syntax for the

web-server

command is:

web-server {enable|disable}

The

web-server

command is executed in the Global Configuration

command mode.

Table 14 "web-server command parameters and variables" (page
56)

describes the parameters and variables for the

web-server

command.

Nortel Ethernet Routing Switch 2500 Series

Security — Configuration and Management

NN47215-505 (323165-B)

02.01

Standard

4.1

19 November 2007