Nortel 1010 Guía Del Usuario
Chapter 2 Getting started 41
Nortel VPN Router Configuration — Basic Features
Figure 7 Deployment Scenario
Changing the management IP address
To manage the system, the network must have a route to the management IP
address through one of the system interfaces.
address through one of the system interfaces.
To change the management IP address, complete the following procedure:
1
Connect the serial cable (supplied with your Nortel VPN Router) from the
Nortel VPN Router serial port to a terminal or a communications port of a PC.
Nortel VPN Router serial port to a terminal or a communications port of a PC.
2
Power on the terminal or PC.
3
Using a terminal emulation program, such as HyperTerminal on the PC,
access the Nortel VPN Router. Your terminal emulator must use the following
communications parameters:
access the Nortel VPN Router. Your terminal emulator must use the following
communications parameters:
•
9600 baud
•
8 data bits