Nortel 2350 Guía Del Usuario
564 Configuring communication with RADIUS
NN47250-500 (320657-F Version 02.01)
Configuring global RADIUS defaults
You can change RADIUS values globally and set a global password (key) with the following command. The key string
is the shared secret that the WSS uses to authenticate itself to the RADIUS server.
is the shared secret that the WSS uses to authenticate itself to the RADIUS server.
set radius {deadtime minutes | encrypted-key string | key string | retransmit number |
timeout seconds}
(To override global settings for individual RADIUS servers, use the set radius server command. See
.)
For example, the following commands set the dead-time timer to 10 minutes and set the password to r8gney for all
RADIUS servers in the WSS configuration:
RADIUS servers in the WSS configuration:
WSS# set radius deadtime 10
success: change accepted.
success: change accepted.
WSS# set radius key r8gney
success: change accepted.
success: change accepted.
To reset global RADIUS server settings to their factory defaults, use the following command:
clear radius {deadtime | key | retransmit | timeout}
For example, the following command resets the dead-time timer to 0 minutes on all RADIUS servers in the WSS
configuration:
configuration:
WSS# clear radius deadtime
success: change accepted.
success: change accepted.