Optoma hd3000 Manual De Usuario
HD3000 User’s Guide
5
HD3000 User’s Guide
Professional Video Scaler and Color Management System
Recommendations
To unleash the power of the HD3000, it is best to input video content in its original form without
any processing. This will utilize the full capabilities of the HD3000 for de-interlacing, scaling and
image enhancement. As an example, if a user has an HDMI DVD player capable of outputting
the video signal in a 480i/576i digital format, we recommend feeding it directly to the HD3000
without any processing by the DVD player. This will provide the HD3000 with the original digital
video stream and allow the HD3000 to fully unleash its studio grade video processing.
any processing. This will utilize the full capabilities of the HD3000 for de-interlacing, scaling and
image enhancement. As an example, if a user has an HDMI DVD player capable of outputting
the video signal in a 480i/576i digital format, we recommend feeding it directly to the HD3000
without any processing by the DVD player. This will provide the HD3000 with the original digital
video stream and allow the HD3000 to fully unleash its studio grade video processing.
In general, we recommend the following:
If possible, use digital output (DVD, D-VHS, DTV setup box, etc). If there is no digital
output, use the component output terminals (YPbPr) with short and high-quality
components cables.
If you are unsure of the quality of the internal de-interlacing or scaler of your video source,
let HD3000 do the processing by connecting to the interlaced component output.
If possible, leave out any extra video processing in your video source (DVD, D-VHS, and
HDTV STB).
Some HDTV STB models have scaling conversion that will output 1080i from a 720p
format. Try to output 1080i in its native signal format and let HD3000 perform de-
interlacing and scaling.
Not all HDMI DVD players have a digital interlaced output (480i/576i). For these products,
it is suggested that users try 480p/576p first, followed by 720p and 1080i. After viewing
the full range of output resolutions, the user can then judge which is the best image quality
and set the HD3000 for that resolution.
Many high-end analog output DVD players also come with high quality DAC with 12 or 14 bits
of processing. Again, the users should try setting their 480i/576i output to HD3000 first.
HD3000 has BNC connectors for component video input. If the user plans to use analog
component to connect to their video source, for the best image quality, it is recommend
using the BNC connectors.
For connecting to Laser Disc player or S-VHS deck, we suggest to use S-video output
connection to connect to HD3000.
It is best to have a separate power outlet for audio and video equipment.
output, use the component output terminals (YPbPr) with short and high-quality
components cables.
If you are unsure of the quality of the internal de-interlacing or scaler of your video source,
let HD3000 do the processing by connecting to the interlaced component output.
If possible, leave out any extra video processing in your video source (DVD, D-VHS, and
HDTV STB).
Some HDTV STB models have scaling conversion that will output 1080i from a 720p
format. Try to output 1080i in its native signal format and let HD3000 perform de-
interlacing and scaling.
Not all HDMI DVD players have a digital interlaced output (480i/576i). For these products,
it is suggested that users try 480p/576p first, followed by 720p and 1080i. After viewing
the full range of output resolutions, the user can then judge which is the best image quality
and set the HD3000 for that resolution.
Many high-end analog output DVD players also come with high quality DAC with 12 or 14 bits
of processing. Again, the users should try setting their 480i/576i output to HD3000 first.
HD3000 has BNC connectors for component video input. If the user plans to use analog
component to connect to their video source, for the best image quality, it is recommend
using the BNC connectors.
For connecting to Laser Disc player or S-VHS deck, we suggest to use S-video output
connection to connect to HD3000.
It is best to have a separate power outlet for audio and video equipment.
•
•
•
•
•
•
•
•
•