Lowrance hds-5x Manual De Usuario

60

1.     Line up the bow of your vessel with a stationary target (lighthouse, 

pier, etc) at least 1 nm away

2.   Select  Adjust Bearing Alignment from the Radar Installation menu 

and press 

enTeR. The Installation Adjustment menu will appear. 

3.   Press the keypad left/right to rotate the radar image so the reference 

target is at 0° or 12 o’clock from the radar center. 

Eliminates the time lag between real radar returns and the time it takes data to be 

processed by the radar software. Range Offset is also referred to as zero range and 

trigger delay. 

1.  Use the 

ZOOM In/ ZOOM OUT keys to  set range to 1/8  nm.

2.   Highlight  Adjust range offset from the Radar Installation menu and 

press 

enTeR. The installation adjustment menu will appear. 

3.   Press the keypad to the left set range offset to 0. 

Press 

enTeR.

4.   If there is a blank, black circle around the center 

or a solid circle of color at the center, increase the 

range  offset  until  the  circle  disappears  or  almost 

disappears.

5.   If you increase the range offset too far, decrease it until the circle 

appears again.