Avocent DSR1020 Notas De La Versión
DSR® x02x/x03x Switches
Firmware Release Notes
Version 3.7.0.13
Oct 28, 2008
This document outlines:
1. Update Instructions
2. Appliance Firmware Version and Language Support Information
3. Enhancements
4. Fixes
5. Known Issues
6. Flash Update Failure Recovery
=============================================================
Update Instructions
=============================================================
Please refer to your user manual for detailed instructions to update the
appliance.
Please refer to your user manual for detailed instructions to update the
appliance.
Important Note:
1. If the appliance currently has a firmware version earlier than 3.2.0.17 (or
3.6.2.17 for DSR 1020, DSR 2020, or DSR 4020 switches) then the
appliance must first be upgraded to 3.2.0.17 (or 3.6.2.17 for DSR 1020,
DSR 2020, or DSR 4020 switches) before it can be updated with this
newest version.
appliance must first be upgraded to 3.2.0.17 (or 3.6.2.17 for DSR 1020,
DSR 2020, or DSR 4020 switches) before it can be updated with this
newest version.
2. Attaching the DSRIQ-VMC module to a Windows target may require the
USB CCID driver to be installed. If the user is prompted by the Windows
‘New Hardware Wizard’ the ‘Next’ button should be pressed.
‘New Hardware Wizard’ the ‘Next’ button should be pressed.
3. For Avocent Power Management Distribution Units (PM™ 2003, 2006,
2024, 3003, 3006, and 3024 PDUs), PDU v110 firmware or higher is
required to be able to manage the PDU from a DSR switch.
required to be able to manage the PDU from a DSR switch.