Avocent DSR1020 Notas De La Versión
=============================================================================
Enhancements
=============================================================================
This release contains the following enhancements:
1. AES Encryption-
Added support for AES encryption of keyboard and mouse, video and virtual media data. This is in
addition to the existing encryption levels already supported (DES, 3DES, 128-bit). AES encryption is
enabled by default for keyboard and mouse data. All encryption is disabled by default for video and
virtual media data. The On Board Web Interface (OBWI) supports AES Encryption.
2. Name Synchronization-
The appliance allows target device names and cascade switch names that are entered in DSView® 3
Management Software to be sent to the appliance and to the DSRIQ modules. If the appliance
receives a target device name or cascade switch name from DSView 3 software that is longer than 15
characters, the appliance will save the longer name, but truncate the name to 15 characters when
storing the name in the DSRIQ module or displaying the name in the OSCAR® graphical user
interface. The OBWI supports name synchronization.
3. Support for Server Technology Power Distribution Units (PDU):
This release contains the following enhancements:
1. AES Encryption-
Added support for AES encryption of keyboard and mouse, video and virtual media data. This is in
addition to the existing encryption levels already supported (DES, 3DES, 128-bit). AES encryption is
enabled by default for keyboard and mouse data. All encryption is disabled by default for video and
virtual media data. The On Board Web Interface (OBWI) supports AES Encryption.
2. Name Synchronization-
The appliance allows target device names and cascade switch names that are entered in DSView® 3
Management Software to be sent to the appliance and to the DSRIQ modules. If the appliance
receives a target device name or cascade switch name from DSView 3 software that is longer than 15
characters, the appliance will save the longer name, but truncate the name to 15 characters when
storing the name in the DSRIQ module or displaying the name in the OSCAR® graphical user
interface. The OBWI supports name synchronization.
3. Support for Server Technology Power Distribution Units (PDU):
Sentry Switched CDU CW-16V1
Sentry Switched CDU CW-16V2
Sentry Switched CDU CW-24V2
Sentry Switched CDU CW-24V3
Sentry Switched CDU CW-32VD1
Sentry Switched CDU CW-32VD2
Sentry Switched CDU CW-8H1
Sentry Switched CDU CW-8H2
Sentry Switched CDU CW-16V2
Sentry Switched CDU CW-24V2
Sentry Switched CDU CW-24V3
Sentry Switched CDU CW-32VD1
Sentry Switched CDU CW-32VD2
Sentry Switched CDU CW-8H1
Sentry Switched CDU CW-8H2
The appliance will support up to two Server Technology PDUs, daisy chained using expansion
modules, connected to the port on the back of the appliance labeled “SPC”.
The OBWI will support Server Technology PDUs that have been licensed by DSView 3 software for
support by the appliance. The OBWI does not support adding Server Technology PDUs.
4. The OBWI supports access control for individual target devices.
5. The OBWI supports Simplified Chinese and Japanese languages.
6. The OBWI supports updating the DSR switch firmware via HTTP binary file upload.
7. The OBWI is now available on the DSR1031, DSR1030, DSR2030, DSR4030, and DSR8030
switches.