PROSCAN psvr83 Guía Del Usuario
46
Recording a Program
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language/Langue
8 Audio
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language/Langue
8 Audio
0 Exit
3. Make sure the Reception: STEREO/MONO/SAP feature is set to STEREO.
A. Press MENU¥PROG to display the VCR MAIN MENU on the TV screen.
B. Press 8 to display the AUDIO menu.
C. Press 1 to select Reception: STEREO.
4. Start audio source playing and press REC on remote or RECORD on the VCR
to begin recording.
REC
appears in the VCRÕs display panel.
5. Press STOP when you are finished.
To Play Back Audio
Connect the AUDIO OUT of the VCR to the appropriate input on your
amplifier or receiver. Do not use the phono input. Refer to your amplifier or
receiver userÕs guide for information.
amplifier or receiver. Do not use the phono input. Refer to your amplifier or
receiver userÕs guide for information.
Audio and Video Dubbing
Audio dubbing records new audio in place of the audio formerly recorded on the
linear (mono) track of the tape. Audio dubbing does not affect the audio recorded on
the Hi-Fi tracks or the recorded video. To playback the
linear (mono) track of the tape. Audio dubbing does not affect the audio recorded on
the Hi-Fi tracks or the recorded video. To playback the
dubbed audio, set the Tape
Playback: HI-FI/MIX/LINEAR feature to LINEAR. To hear the original audio, set
the Tape Playback feature to HI-FI.
the Tape Playback feature to HI-FI.
Video dubbing records new video in place of existing video segments. Hi-fi audio
will be erased, but linear audio will remain unchanged. The flying erase head
produces clean edits when you video dub.
will be erased, but linear audio will remain unchanged. The flying erase head
produces clean edits when you video dub.
To Audio Dub (Refer to hookup on page 8.)
1. Turn on the audio source and VCR.
2. Tune the TV to the VCR viewing channel, either 3, 4, or the TVÕs video input.
3. Insert the tape you want to dub on into the VCR.
4. Press INPUT on VCRÕs remote to select the line input (L1 or L2).
ÒL1Ó or ÒL2Ó appears in the VCRÕs display panel.
5. Press PLAY. When you reach the point on the tape where you want to begin
dubbing, press PAUSE.
6. Press A¥V DUB on the remote until ADUB appears in the VCRÕs display
panel. The VCR enters the audio dubbing mode and ADUB remains in the
VCRÕs display panel.
VCRÕs display panel.
7. Start the audio source playing, and press PAUSE to begin audio dubbing.*
New audio is recorded on the linear track.
8. Press STOP when you are finished.
* You can turn off the TV after the dubbing has started as it does not have to
be on to dub a tape.
AUDIO
1 Reception: STEREO
2 Tape Playback: HI-FI
2 Tape Playback: HI-FI
0 Exit