Aiwa xc-30 Guía De Operación
En
PROGRAMMED EDIT RECORDING
This function lets you program tracks to be recorded from all of
the discs, in any order. The remaining time on each side of the
tape is displayed as you program the tracks.
the discs, in any order. The remaining time on each side of the
tape is displayed as you program the tracks.
Use the remote control.
1 Prepare for recording.
2 Load the disc(s) onto the disc trays.
3 Press the PRGM EDIT button.
“
” appears around PRGM and EDIT in the display.
4 Press the numbered buttons to designate the tape
length.
Enter a length from 10 to 99 minutes.
Example: when using a 60-minute tape, press the 6 and 0
buttons.
Example: when using a 60-minute tape, press the 6 and 0
buttons.
5 Press one of the DISC 1-5 buttons to select a disc.
To program the whole disc, press the selected DISC 1-5
button again, the track numbers on the music calendar flash
for 6 seconds. Press the PRGM/CHECK button during these
6 seconds to enter the program.
To select a track, go to the next step.
button again, the track numbers on the music calendar flash
for 6 seconds. Press the PRGM/CHECK button during these
6 seconds to enter the program.
To select a track, go to the next step.
6 Press the numbered buttons and the +10 button
to program a track to be recorded on side A.
7 Repeat steps 5 and 6 to program the rest of the
tracks on side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
cannot be programmed.
8 Press the PRGM EDIT button to select side B.
9 Program the tracks to be recorded on side B.
After confirming the side in the display, repeat steps 5 and 6.
10 Select the CD or AUX function in the stereo
system.
11 Start recording.
Press the
c
/
a
button on the XC-30M to start play and the
button for recording on the connected stereo system.
After play of programmed tracks on the front side finishes, the
XC-30M pauses. Reverse the cassette tape and start play and
recording again. Play of programmed tracks on the reverse side
starts.
After play of programmed tracks on the front side finishes, the
XC-30M pauses. Reverse the cassette tape and start play and
recording again. Play of programmed tracks on the reverse side
starts.
To stop recording in the middle of the program
Press the
Press the
s
button on the cassette deck.
To check the order of the programmed tracks
Before recording, press the PRGM EDIT button to select side A
or B, and press the PRGM/CHECK button repeatedly. The tracks
in the program are shown from the first track.
Before recording, press the PRGM EDIT button to select side A
or B, and press the PRGM/CHECK button repeatedly. The tracks
in the program are shown from the first track.
To delete a programmed track
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly to display the
track to be deleted, and then press the DELETE button on the
main unit.
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly to display the
track to be deleted, and then press the DELETE button on the
main unit.
To change the program of each side
Press the PRGM EDIT button to select side A or B, and press
the
Press the PRGM EDIT button to select side A or B, and press
the
s
button to clear the program of the selected side. Then
program tracks again.
To clear the edit program
Before recording, press the
Before recording, press the
s
button twice so that “
”
around EDIT goes out.
In programmed edit recording, only the first 30 tracks of a disc
can be edited, even if the disc contains 31 tracks or more.
can be edited, even if the disc contains 31 tracks or more.
Selected disc number
Tape side
Total number of
programmed tracks
programmed tracks
Time remaining of
side A
side A
Selected
track number
track number
ENGLISH
8
RECORDING