Extreme 3802 Manual De Hardware
Meeting Power Requirements
Extreme Networks Consolidated Hardware Guide
53
For more information about the power specifications of the Extreme Networks family of switches, see
Appendix B, “Switch Technical Specifications” on page 303.
Appendix B, “Switch Technical Specifications” on page 303.
Power Supply Requirements
Adhere to the following requirements in order to operate your Extreme Networks equipment safely:
•
Ensure that your equipment is placed in an area that accommodates the power consumption and
component heat dissipation specifications.
component heat dissipation specifications.
•
Ensure that your power supply meets the site power, AC power, or DC power requirements of the
network equipment.
network equipment.
•
Ensure that DC connections are made by an on-site electrician.
NOTE
For power specifications for Extreme Networks products, see the Extreme Networks website at
http://www.extremenetworks.com.
http://www.extremenetworks.com.
•
When connecting power to installed equipment, avoid connecting through an extension cord or
power strip.
power strip.
•
If your switch includes more than one power supply, connect each power supply to different,
independent power sources. If a power source fails, it will only affect the switch power supply to
which it is connected. If all switch power supplies are connected to a single power source, the entire
switch is vulnerable to a power source failure.
independent power sources. If a power source fails, it will only affect the switch power supply to
which it is connected. If all switch power supplies are connected to a single power source, the entire
switch is vulnerable to a power source failure.
AC Power Cable Requirements
Use an AC power cable appropriate for your country. Check your local electrical codes and regulatory
agencies for power cable requirements. The countries listed in Table 19 have the following additional
requirements:
agencies for power cable requirements. The countries listed in Table 19 have the following additional
requirements:
Table 19: AC power cable requirements
Country
Requirements
USA and Canada
•
The cable set must be UL-approved and CSA-certified.
•
The minimum specification for the flexible cable is No. 18
AWG (1.5 mm
AWG (1.5 mm
2
), Type SVT or SJT, 3-conductor.
•
The cable set must have a rated current capacity of at least
the amount rated for each specific product.
the amount rated for each specific product.
•
The attachment plug must be an Earth-grounding type with
a NEMA 5-15P (10 A, 125 V) configuration.
a NEMA 5-15P (10 A, 125 V) configuration.
Denmark
The supply plug must comply with section 107-2-D1, standard
DK2-1a or DK2-5a.
DK2-1a or DK2-5a.
Switzerland
The supply plug must comply with SEV/ASE 1011.
Argentina
The supply plug must comply with Argentinian standards.