Extreme wm100 Guía Del Usuario
Availability and Mobility configuration
HWC_GSG_Avail&MobilConfiguration.fm
Configuring availability feature
120385-00 Rev 01, March 2007
128
Summit WM, Getting Started Guide
11. In the Summit WM Switch IP Address, type the IP address of the
management port or physical port of the primary Summit WM Switch.
12. Clear the Current Summit Switch is primary connection point checkbox.
13. From the main menu of the primary Summit WM Switch, click Altitude AP
Configuration. The Altitude AP Configuration screen is displayed.
14. In the Security Mode, select one of the security mode options. For more
information, see page
15. To save your changes in the primary Summit WM Switch, click Save.
16. Open the Altitude AP Configuration of the secondary Summit WM Switch.
17. In the Security Mode, select one of the security mode options. For more
information, see page
18. To save your changes in the secondary Summit WM Switch, click Save.
9.2.5 Viewing the Altitude AP availability display
The Altitude AP availability display provides the active connection state of an
Altitude AP.
Altitude AP.
The display depicts the Altitude APs as color-coded boxes — Green and Red —
on the screen:
on the screen:
•
Green – The Altitude AP is configured on the Summit WM Switch and is
currently connected.
currently connected.
•
Red – The Altitude AP is configured on the Summit WM Switch but is currently
not connected (not available to service this Summit WM Switch).
not connected (not available to service this Summit WM Switch).