Extreme wm100 Guía Del Usuario

HWC_GSG_Avail&MobilConfiguration.fm

 120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide

   

   

  

If you select Enabled in the SLP Registration drop-down list, you must configure SLP on 
the network. 

Note: If you have configured DHCP service in Windows 2003 server, you must make 
sure to enable Option 78 SLP DA in Configure Options window. For more 
information on how to configure Option 78 SLP DA, see 

8. In the Add text box, type the IP address of the Summit WM Switch mobility 

agent. The IP address is displayed in the Permission List box.

You can add as many agents you want by repeating Step 8.

9. In the Permission List box, select the IP addresses you want to approve.

10. Click Approve. The IP addresses are approved.

11. In the Security Mode section, select either of the two options: 

Allow all mobility agents to connect – A new agent automatically 
registers itself with the mobility manager and becomes part of the mobility 
domain.

Allow only approved mobility agents to connect – The manager does 
not allow a new agent to automatically register. Instead, the connection 
with the new agent is placed in pending state until the administrator 
approves it.

12. To save your changes, click Save.

To configure Summit WM Switch as a mobility agent:

1. From the main menu, click Summit Switch Configuration. The Summit 

Switch Configuration screen is displayed.

2. In the left pane, click Mobility Manager. The Mobility Manager Settings 

screen is displayed.

3. To enable mobility for this Summit WM Switch, select Enable Mobility. The 

mobility options are displayed.

4. Select This Summit Switch is a Mobility Agent. The mobility agent options 

are displayed.

5. In the Port drop-down list, select the interface of the Summit WM Switch that 

is to be used as the mobility agent. 

Ensure that the selected interface is routable on the network.