Extreme wm100 Guía Del Usuario

HWC_GSG_Chapter 1_Overview.fm

 120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide

   

   

  

RUN LED – Indicates the CPU’s initialization has completed and the system 
is ready to provide application level services. 

ACT LED – Indicates the system’s software is in active running state.

WARNING/ERROR LEDs – Indicate a problem in the running state of the 
system. 

Whenever either of the alarm LEDs is lit, the seven-segment display 
provides the corresponding code point for the error indication. When the 
system is fully active and running, the console displays the letter A as 
seen in 

Diagnostic Switch – Pressing the Reset and Diagnostic switch 
simultaneously reboots the system in diagnostic mode.

Note: The diagnostic switch should be used only upon the request of a service 
technician.

INT LED – Not used in the current release.

Green

0

Application initialization started.

Green

1

Forwarding Engine initialization 
complete. Application initialization.

Green

A

Application initialization complete. 
System active.

Green

H

System halted. Administrator requested 
halting of system.

Green

Yellow

1

High temperature reached.

Green

Yellow

2

Fan unit failure. Rotation counter 
indicates zero speed for one of the 
lateral trays. May be the result of fan 
tray removal.