Extreme wm100 Guía Del Usuario

HWC_GSG_Chapter 1_Overview.fm

 120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide

   

   

  

You must use the following table to document all the pertinent information about 
the Summit WM Switch before starting the installation process. 

Some of the information listed in the table may not be relevant to your network 
configuration. You must only record the information that is pertinent to your 
network configuration.

Accessing the 
Summit WM 
Switch for the first 
time

• Unused IP address in the 192.168.10.0/24 subnet – This IP 

address must be assigned to the Ethernet port of your laptop 
computer. You can use any IP address between 192.168.10.2 and 
192.168.10.255.

• Factory default IP address of Summit WM Switch – The factory 

default IP address is https//192.168.10.1:5825. You must 
type this IP address in the address bar of your Web browser when 
you access the Summit WM Switch for the first time.

• Login Information – The login information is as follows:

User Name: admin

Password: abc123

Management Port 
information

• Hostname – Specifies the name of the Summit WM Switch.
• Domain – Specifies the IP domain name of the enterprise 

network.

• Management IP Address – The new IP address for the Summit 

WM Switch’s management port. Change the value in this text box 
to the IP address assigned to the Summit WM Switch’s 
management port by your network administrator.

• Subnet Mask – The subnet mask for the IP address to separate 

the network portion from the host portion of the address (typically 
255.255.255.0)

• Management Gateway – The default gateway of the network.
• Primary DNS – The primary DNS server used by the network.
• Secondary DNS – The secondary DNS server used by the 

network.

Hardware 
information

• MAC  Address – MAC address of the Summit WM Switch’s 

management port

• Serial  # – The Summit WM Switch’s serial #.

License Key (File) An .xml file that is provided along with the product. This file must be 

applied to the product to enable all the functionalities.