Extreme wm100 Guía Del Usuario

HWC_GSG_Chapter 2_Default_Settings.fm

 120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide

   

   

  

Management Gateway – Specifies the default gateway of the network as 
provided by the network administrator.

Primary DNS – Specifies the primary DNS server used by the network as 
provided by your network administrator as provided by your network 
administrator. This field is optional.

Secondary DNS – Specifies the secondary DNS server used by the 
network as provided by your network administrator. This field is optional.

12. Click OK. 

Note: The Web connection between the computer and the Summit Switch is lost. The 
IP addresses are now set to the network you defined.

Now you must connect the Summit Switch to the enterprise network. The 
following section explains how to connect the Summit Switch to the enterprise 
network.

To connect the Summit Switch to the enterprise network:

1. Disconnect your laptop computer from the Summit Switch management port.

2. Connect the Summit Switch management port to the enterprise Ethernet 

LAN. The Summit Switch resets automatically.

3. Log on to the Extreme Networks Summit WM-Series Console from any 

computer on the enterprise network. Type the following URL in a browser to 
access the Extreme Networks Summit WM-Series Console: tap://<IP 

Address>:5825

Before you proceed further, you must change the default administrator password. 
The following section explains how to change the default administrator password.

To change the administrator password:

1. Login on the Summit Switch using the default administrator password.

2. From the main menu, click Summit Switch Configuration. The Summit 

Switch Configuration screen is displayed.

3. In the left, click Management Users.

4. In the user_admin table, click admin.