Extreme wm100 Guía Del Usuario
Physical ports configuration
HWC_GSG_PhysicalPortConfiguration..fm
Configuring data ports
120385-00 Rev 01, March 2007
50
Summit WM, Getting Started Guide
If the interface is directly attached to an existing VLAN, you must specify which
VLAN the port belongs to by tagging the VLAN ID to the port. When you tag the
VLAN ID to the port, all packets associated with the port would be tagged with the
corresponding VLAN. This enables the Summit WM Switch to directly connect to
a VLAN network without the need to remove VLAN tags at the connection port.
VLAN the port belongs to by tagging the VLAN ID to the port. When you tag the
VLAN ID to the port, all packets associated with the port would be tagged with the
corresponding VLAN. This enables the Summit WM Switch to directly connect to
a VLAN network without the need to remove VLAN tags at the connection port.
Note: Only the following models support VLAN:
•
Summit Switch WM2000
• Summit Switch WM200
4.2 Configuring data ports
To configure the data port interfaces on the Summit WM Switch:
1. From the main menu, click Summit Switch Configuration. The Summit
Switch Configuration screen is displayed.
2. In the left pane, click IP Addresses. The Management Port Settings screen
is displayed.