Extreme wm100 Guía Del Usuario
HWC_GSG_APConfiguration.fm
Altitude AP’s configuration
Altitude AP’s LED states
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
Summit WM, Getting Started Guide
93
7.7 Altitude AP’s LED states
When the Altitude AP is powered on and boots, you can follow its progress
through the registration process by observing the LED sequence described
below.
through the registration process by observing the LED sequence described
below.
The Status LED (center) also indicates power — unlit when unit is off, and green
(solid) when the Altitude AP has completed discovery and is operational.
(solid) when the Altitude AP has completed discovery and is operational.
Figure 12
Altitude AP LEDs
Left LED Status
Center LED Status
Right LED
Status
Status
Altitude AP Status
Off
Off
Off
Powered-off
Off
Green
Off
Beginning of Power-on-Self-Test (POST) (0.5 seconds)
Off
Off
Off
Power-on-Self-Test (POST
Off
Red
Off
Failure during POST
Green
Off
Green
Random delay – State displayed only after a vulnerable reset
Green/Off
Off/Green
Green/Off
Vulnerable time interval – The Altitude AP resets to factory
default if powered-off for three consecutive times during this
state. No vulnerable period when Altitude AP is resetting to
factory defaults.
default if powered-off for three consecutive times during this
state. No vulnerable period when Altitude AP is resetting to
factory defaults.
Green/Off/Off
Off/Green/Off
Off/Off/Green Resetting to factory defaults announcement – replaces
vulnerable period. This pattern is repeated twice to notify the
operator when the factory configuration is restored.
operator when the factory configuration is restored.
Off
Orange
(Green + Red
(Green + Red
)
Off
Attempting to obtain an IP address via DHCP.
Off
Red/Orange
Off
No DHCP reply has been received.
Off
Green/Orange
Off
Failed discovery (SLP)
Off
Off/Orange
Off
Summit WM Switch has been discovered. Registering the
Altitude AP.
Altitude AP.
Off
Off/Red
Off
Registration of the Altitude AP has failed.
Off
Off/Green
Off
Standby, registered with a Summit WM Switch, waiting for
configuration.
configuration.
Table 5
Altitude AP LED status