Citel 3000 Guía Del Usuario
Page 12
EXTender 3000 System Administrator’s Guide (Definity)
Office Module Installation
ISDN Line Checklist
The recommended ISDN line provisioning for your U or S/T interface ISDN line is:
•
ISDN CO Switch type:
•
U Interface: AT&T 5ESS, Nortel DMS100, or National ISDN NI-1
•
S/T Interface: ETSI NET3
•
Circuit Switched Voice and Data on both B channels (B1 and B2).
•
No call features are required on any B channels.
•
Must be capable of 56K or 64k Synchronous Data Calls, Clear Channel.
Note: Specifications are subject to change without notice as technological or manufacturing
changes warrant.
changes warrant.
•
Ensure you have the proper ISDN line installed at the Remote module’s site.
•
Ensure you know the SPID/DN numbers (U interface), TEI type and Connect Rate (56K or 64K).
You obtain this information from your local ISDN service provider when the ISDN lines are
installed. Note that the S/T Interface uses MSN (Multiple Subscriber Number) numbers instead of
SPID or DN numbers
installed. Note that the S/T Interface uses MSN (Multiple Subscriber Number) numbers instead of
SPID or DN numbers
•
Ensure that you have registered the ISDN lines with your long distance carrier for ISDN DATA Ser-
vice, if required.
PC or Network Connection
If you are connecting EXTender 3000 to a PC or network, you will require:
For the Serial or Dial-up configurations:
•
One serial cable with a male DB9 cable end suitable for LAN connectivity at the Office module
site.
For the Ethernet configuration:
•
One Ethernet cable for the Office module.
•
One Ethernet port connecting to the LAN.