Citel 3000 Guía Del Usuario
Page 70
EXTender 3000 System Administrator’s Guide (Definity)
Data Communication Installation Topologies
Ethernet Data Type Installation Topologies
Remote Module Connection
•
The remote PC must have an Ethernet Interface Network Card.
•
Connect one end of a crossover Ethernet cable into the port labelled ETHERNET on the back of the
Remote Module, and the other end into the PC’s Ethernet interface card.
or
•
Using straight through Ethernet cables, connect both the PC and the Remote Module to a network
HUB. The Remote Module will bridge Ethernet data from any device on the network hub.
or
•
Connect the Remote Module to the Uplink port on the HUB using a crossover cable. Again, this
will enable the Remote Module to bridge Ethernet data from any device on the network hub.
Office Module Connection
The Office Module’s ETHERNET port should have been connected to the LAN using a straight through
Ethernet cable.
Ethernet cable.
Ethernet Data Configuration 1A – Ethernet Data through Extenders, Single Remote PC
Figure 10: Single Remote PC Ethernet Data Through the Office Module
Office Module
PBX
ISDN
PC with Network Card
Remote Module
Digital Phone
Ethernet Crossover
Cable
LAN
Ethernet