Citel 3000 Guía Del Usuario
Page 82
EXTender 3000 System Administrator’s Guide (Definity)
Ethernet Data Type Configuration – Office Module
Setting Receiver User Name
Change Receive User Name is for configuring the user name that the other system must send for authenticat-
ing the PPP connection. By default, no user name is specified, but a name and password must be specified if
Receive Authentication is enabled.
Change Receive User Name is for configuring the user name that the other system must send for authenticat-
ing the PPP connection. By default, no user name is specified, but a name and password must be specified if
Receive Authentication is enabled.
Remote Module Office Module
Send User Name
Receive User Name
From the Configure PPP menu:
1.
Select Change Receive User Name.
2.
Enter the new user name, up to 15 characters.
3.
Press Enter to accept the new user name.
Setting Receive Password
The Receive Password is the password the other system must send to authenticate the PPP connection. By
default, no password is specified, but a name must be specified if Local Authentication is enabled.
default, no password is specified, but a name must be specified if Local Authentication is enabled.
Remote Module Office Module
Send Password
Send Password
Receive Password
From the Configure PPP menu:
1.
Select Change Receive Password.
2.
Enter the new password, up to 15 characters. For security reasons, asterisks (*) will appear in place of
the characters typed.
the characters typed.
3.
Press Enter to accept the new password. Asterisks will appear on the screen for each character.
Setting Send Authentication
Send Authentication is used to specify the authentication protocol that the system at the remote site requires
the Office Module to use to authenticate the connection. The default for Send Authentication is None.
the Office Module to use to authenticate the connection. The default for Send Authentication is None.
Remote Module Office Module
Receive Authentication
Send Authentication
From the Configure PPP menu:
1.
Select Send Authentication.
The following options will appear:
1. None
2. PAP
3. CHAP
1. None
2. PAP
3. CHAP
2.
Highlight the desired authentication option and press Enter to select.