Citel 3000 Manual Suplementario
070707
Page 2 of 3
Copyright 2007 Citel plc All Rights Reserved
108B
Number of times MCK or phone
signaling channel had no data for
16 consecutive seconds.
signaling channel had no data for
16 consecutive seconds.
Indicates that no data has been received
for 16 sec. MCK always sends a keep
alive every 8 sec. so this error would
indicate data is not getting through the
ISDN network.
for 16 sec. MCK always sends a keep
alive every 8 sec. so this error would
indicate data is not getting through the
ISDN network.
109A
Number of times MCK or phone
signaling channel timed out
waiting for packet
acknowledgment.
signaling channel timed out
waiting for packet
acknowledgment.
Did
not
get
a
V42
signaling
acknowledgement. As long as you are not
getting 106B errors, this is not necessarily
a problem. Excessive errors or 106B
errors indicate a problem with the ISDN
line.
getting 106B errors, this is not necessarily
a problem. Excessive errors or 106B
errors indicate a problem with the ISDN
line.
110C
Number of times MCK or phone
signaling channel transmit locked
up (transmit buffers full when no
data to send).
signaling channel transmit locked
up (transmit buffers full when no
data to send).
The 8 second TX timer timed out and
buffers were full. This should not occur.
Needs further investigation by MCK.
buffers were full. This should not occur.
Needs further investigation by MCK.
111A
Number of rejected serial data
packets received because they
were out of sequence.
packets received because they
were out of sequence.
Same as ‘105A’ except this is Serial Data.
112B
Number of times serial data
packet re-transmissions exceeded
maximum (Causes serial data to
be lost).
packet re-transmissions exceeded
maximum (Causes serial data to
be lost).
Same as ‘106B’ except this is Serial Data.
113B
Number of times serial data
channel had to be re-
synchronized.
channel had to be re-
synchronized.
Same as ‘107B’ except this is Serial Data.
114A
Number of times serial data
channel timed out waiting for
packet acknowledgment.
channel timed out waiting for
packet acknowledgment.
Same as ‘109A’ except this is Serial Data.
116B
Number of times carrier detect
lost from ISDN termination.
lost from ISDN termination.
ISDN
call
was
lost
or
far
end
disconnected because of errors. May be
an ISDN problem or problem with unit on
far end. ISDN problems should have
other errors accompanying this one.
an ISDN problem or problem with unit on
far end. ISDN problems should have
other errors accompanying this one.
117C
Number of times Terminal
Adapter check failed.
Adapter check failed.
Occurs on old ISDN only.
118C
Number of times communications
to DSP failed.
to DSP failed.
Contact MCK. Should never occur.
119B
Number of times Digital port link
re-activated.
re-activated.
Digital port or phone was disconnected.
Check wiring. However, using the TTI
feature could cause these errors under
normal operation.
Check wiring. However, using the TTI
feature could cause these errors under
normal operation.
120B
Number of times Digital port
connection was lost or de-
activated.
connection was lost or de-
activated.
Contact MCK. Should never occur.
121A
Number of times Digital port data
was re-transmitted.
was re-transmitted.
Contact MCK. Should never occur.