Citel 3000 Guía De Instalación
Page 32
EXTender 3000 Quick Installation Guide
Norstar/Meridian - Configuring the Remote Module
Configuration by Telephone
You use your digital telephone to configure the Remote Module by pressing the first three soft keys just
below the LCD display. The keys, in order from left to right, are: RLS (Accept), PRV (for PREVious), OK,
NEXT. Use the RLS key to accept the values you entered. The digital telephone will display messages that
will easily guide you through the various menus of the EXTender configuration procedure.
below the LCD display. The keys, in order from left to right, are: RLS (Accept), PRV (for PREVious), OK,
NEXT. Use the RLS key to accept the values you entered. The digital telephone will display messages that
will easily guide you through the various menus of the EXTender configuration procedure.
For U interface units you must program the SPID numbers and the numbers for your ISDN line. For S/T
interface you can configure the MSN numbers if required.
interface you can configure the MSN numbers if required.
Note: S/T interfaces uses a DN or MSN number. U interface uses SPID numbers.
1.
From the Go Online menu press Next until you reach the Set ISDN Parameters menu. Press OK.
2.
Program your ISDN CO Switch Type, SPID1 and SPID2 (U interface), DN1/MSN1 and DN2/MSN2
numbers, these parameters should be provided by your CO or PBX System Administrator. The TEI type
and ISDN Connect Rate are default to “Auto.”
numbers, these parameters should be provided by your CO or PBX System Administrator. The TEI type
and ISDN Connect Rate are default to “Auto.”
3.
Press PRV to return to the Set ISDN Parameters menu. If you have made any changes you will be
prompted to save them. Press OK to save.
prompted to save them. Press OK to save.
4.
Program the Switch Module phone number using the Set Dial Numbers menu on the digital telephone.
This is the Switch Module’s MSN, and will be used for the Remote Module to Go Online, and connect
to the Switch Module.
This is the Switch Module’s MSN, and will be used for the Remote Module to Go Online, and connect
to the Switch Module.
5.
From Set ISDN Parameters menu press NEXT until you reach the Set Dial Numbers Menu. Press
OK.
OK.
6.
Program the Office phone number from the Set Office Dial Numbers menu on the digital telephone.
This is the Office Module’s DN1/MSN1, and will be used for the Remote Module to Go Online, and
connect to the Office Module.
This is the Office Module’s DN1/MSN1, and will be used for the Remote Module to Go Online, and
connect to the Office Module.
7.
Program the Remote Module phone number from the Set Dial Numbers menu if you plan to use the
Remote Module Call On Demand (COD) or Dialback features.
Remote Module Call On Demand (COD) or Dialback features.
8.
From the Set Office Number menu press NEXT to advance to the Set Remote Number menu.
The remote phone number should be set to the Remote Module’s DN/MSN line phone number. It
should be set exactly as needed for the Switch Module to reach the Remote Module. If your Switch
Modules are connected behind your PBX, do not forget to begin the phone number with an external line
access code if applicable.
Call On Demand (COD) can reduce long distance line costs by establishing a connection only when a
call is detected, or when there is activity on the remote phone. Dialback enables the Switch Module to
disconnect, and then dial back to the Remote Module after a connection has been successfully com-
pleted. This feature can reduce line charges incurred by your Remote Module. For more information on
configuration of dialback or COD, consult the System Administrator’s Guide.
Modules are connected behind your PBX, do not forget to begin the phone number with an external line
access code if applicable.
Call On Demand (COD) can reduce long distance line costs by establishing a connection only when a
call is detected, or when there is activity on the remote phone. Dialback enables the Switch Module to
disconnect, and then dial back to the Remote Module after a connection has been successfully com-
pleted. This feature can reduce line charges incurred by your Remote Module. For more information on
configuration of dialback or COD, consult the System Administrator’s Guide.
Dialback enables the Office Module to disconnect, and then dial back to the Remote Module after a con-
nection has been successfully completed. This feature can reduce line charges incurred by your Remote
Module.
nection has been successfully completed. This feature can reduce line charges incurred by your Remote
Module.
9.
Set the remote number to the DN1/MSN1 number of the remote unit.