Citel 6000 Guía De Instalación

EXTender 6000 Quick Installation Guide

 

17

 

 

•  If you type “Yes ”, the wizard asks a series of configuration questions. (See page 31.) 
•  If you type “No”, the PC displays the following message: 

Press “Enter” to start the EXTender shell….. 

 
Note: If the EXTender is powered up prior to opening the terminal program, this message does not 
appear. 
 
Go to Basic Configuration on the next page. 

Basic Configuration 

Press Enter. The MI Welcome Screen is displayed. 
 

 

The MI requires a screen size of 24 lines X 80 columns. Make sure the Welcome Screen is bordered on 

all four sides with a # symbol, as shown in the figure above. 

 
To enlarge the screen (within the VT-100 application) 
1.  Click any corner of the screen. 
2.  Drag the screen to enlarge. 
3.  Check that the screen is bordered by “#” symbols. 
 
Press any key to continue. The Main Menu is displayed. 
 
If you already familiar with using the MI, proceed to page 18 for information on setting the parameters for 
the different Network Environments.  
 
Or…….. 
 
Press F1 for the MI Help Screen, which provides basic information for navigating through the interface.