Citel 6000 Guía De Instalación

EXTender 6000 Quick Installation Guide

 

38

 

 

Setting up the Analog Port 

Note: The analog line card is not available outside North America. 
 
The EXTender 6000 may be equipped with an extra RJ-11 port on the back panel. This port is labeled 
“Analog” and it provides a connection to an analog telephone line (pro-vided at the remote location) for 
the purpose of placing local or emergency calls. 
 
Once the unit is connected to the analog line, the remote user simply presses the assigned key on the 
digital telephone and dials the telephone number. Only one remote user can dial out at any one time. 
 
IMPORTANT NOTE: If power to the remote unit fails, the Analog port is not available to the digital 
telephones. If another telephone tries to use the analog line while it is busy, it hears a “Busy” tone. 
 
Procedure 
 
1.  Select Analog command using the following path: 
 

Remote->Configuration->Analog Card 

 

The following menu appears: 

 

2. Press 

the 

Æ

 key to enable analog port access for all 12 ports, or press the ↓ key to set individual 

ports. 
Note: This procedure sets the <Default> setting for all ports. 

 

 

3. Press 

the 

Ækey to enable or disable the analog port. 

 
4. Press 

the 

Èkey to set the numeric “key”, which must be pressed on the remote telephone before 

placing an analog call.