Citel 6000 Guía De Instalación
EXTender 6000 Quick Installation Guide
23
Setting the Mode (signaling protocol)
Procedure
1. Access
1. Access
the
WAN 1 or WAN 2 Menu using the following path;
Path:
Remote or Gateway->Configuration->WAN 1 or 2
The WAN menu appears.
Figure 11: Mode
2. Press
the
Ækey to access the parameters.
3. Press
the
Èkey to the Mode parameter. This parameter must match the protocol used by the network
device connected to the WAN port. Press the
→ key to scroll through the available protocols.
4. Press
the
Å key to accept changes and go back to the Configuration Menu.
5. Press
the
Èkey to the Save parameter.
6. Press
Enter to save changes to the active config (.rem) file.