Citel 6000 Guía Del Usuario
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
129
Banner
Parameter Location:
Gateway/Remote ->Configuration->Port->Banner
Description: A message or banner is displayed on the Remote phone on power-
up or reboot while the phone is offline.
Usage: Used for ID purposes and customization.
Example: Acme Inc.- Service Division
Dependencies:
Gateway/Remote ->Configuration->Port->Banner
Description: A message or banner is displayed on the Remote phone on power-
up or reboot while the phone is offline.
Usage: Used for ID purposes and customization.
Example: Acme Inc.- Service Division
Dependencies:
• Remote unit only
• Auto-Connect must be disabled, works with two-wire display phones only.
• Auto-Connect must be disabled, works with two-wire display phones only.
See Also: Chapter 4 Banner
Begin Test
(IP)
(IP)
Parameter Location:
Gateway/Remote ->Utilities->Diagnostics->Test IP
Description: A function that ensures IP communication is working correctly.
Usage: Same as the MS-DOS PING command. Sends packets back and forth
to the unit specified by the IP Address parameter, which is directly below the
Begin Test parameter. Upon successful test completion, messages describing
the test will appear on the screen.
Dependencies: N/A
Gateway/Remote ->Utilities->Diagnostics->Test IP
Description: A function that ensures IP communication is working correctly.
Usage: Same as the MS-DOS PING command. Sends packets back and forth
to the unit specified by the IP Address parameter, which is directly below the
Begin Test parameter. Upon successful test completion, messages describing
the test will appear on the screen.
Dependencies: N/A
Begin Test
(WAN)
(WAN)
Parameter Location:
Gateway/Remote ->Utilities->Diagnostics->Test WAN 1
Description: A function that ensures WAN communication is working correctly.
Usage: Sends packets back and forth over the WAN. Upon successful test
completion, messages describing the test will appear on the screen.
Dependencies: N/A
Gateway/Remote ->Utilities->Diagnostics->Test WAN 1
Description: A function that ensures WAN communication is working correctly.
Usage: Sends packets back and forth over the WAN. Upon successful test
completion, messages describing the test will appear on the screen.
Dependencies: N/A
Clear Log
Parameter Location:
Gateway/Remote ->Utilities->System->
Description: Clears the log of events that occur on the PBXgateway and
Remote units.
Usage: When you want to clear the log of boot-up and other information that you
don’t need.
Dependencies: N/A
WARNING: Cannot “Undo” this command. Once selected the Log Messages are
permanently removed.
Gateway/Remote ->Utilities->System->
Description: Clears the log of events that occur on the PBXgateway and
Remote units.
Usage: When you want to clear the log of boot-up and other information that you
don’t need.
Dependencies: N/A
WARNING: Cannot “Undo” this command. Once selected the Log Messages are
permanently removed.