Citel 6000 Guía Del Usuario
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
90
Divide this bandwidth by either 64 or 56, in order to establish the correct number of DS0 channels to be
used.
Example: If your DS0s on your CSU/DSUs are set up for 56Kbps, use 56 and if they are set up for
64Kbps DS0s, use 64.
used.
Example: If your DS0s on your CSU/DSUs are set up for 56Kbps, use 56 and if they are set up for
64Kbps DS0s, use 64.
Configuring the Remote Units (RVP_Over_IP)
When configuring the remote units for 2:1 operation, you need to set the Remote Number. With
RVP_Over_IP instead of using the Gateway Port Offset parameters to distinguish ports on each remote
the Port User ID’s may used as well, to determine what ports on the Remote will match up to what ports
on the Gateway.
RVP_Over_IP instead of using the Gateway Port Offset parameters to distinguish ports on each remote
the Port User ID’s may used as well, to determine what ports on the Remote will match up to what ports
on the Gateway.
Figure 45: User IDs – 2:1 RVP_Over _IP
Note: Remote User ID’s must match Gateway User ID’s.