SATO LT408 Guia De Especificaciones
SATO “F
lAg
T
Ag
™” A
pplicATOr
H
eAd
Dual Applicator
Single Applicator
Pallet-Labeling with SATO Printer and “FlagTag™”
The
“FlagTagSolution™”
is designed to be used with the SATO CL4e and GL4e Series on-demand, RFID-enabled printer, as well as SATO’s
RFID S-Type print engine for automated print and apply solutions.
Automatic Print & Apply
Solutions Examples
rFid Oem e
ngineS
CLe RFID p
rinTerS
GL4e RFID p
rinTerS
Print Method
Direct Thermal / Thermal Transfer
Direct Thermal / Thermal Transfer
Direct Thermal / Thermal Transfer
Resolution
203 dpi
203 dpi / 305 dpi
203 dpi / 305 dpi
Standard Memory
Std: 16 MB RAM / 2 MB Flash
Opt: 1 MB PCMCIA / 6 MB Flash
Std: 16 MB RAM / 2 MB Flash
Opt: 1 MB PCMCIA / 6 MB Flash
Std: 32 MB DRAM / 8 MB Flash
Opt: 32 MB Flash
Max. Print Width
5" (128 mm)
4.1" (104 mm)
4.09" (104 mm)
Max. Print Length
49.2" (1249 mm)
49.2" (1249 mm) / 32.8" (833 mm)
98.98" (2514 mm)
Min. Media Width
1" (25 mm) w/o RFID inlay; Varies with
RFID inlay
0.87" (22 mm)
0.87" (22 mm)
Max. Media Width
5.27" (134 mm)
5.1" (131 mm)
5.04" (128 mm)
Max Print Speed
12"/sec (300 mm/sec)
6"/sec (150 mm/sec)
10"/sec (254 mm/sec)
Interface
RS232C, IEEE1284 (ECP), Wireless
Ethernet (802.11g), LAN (10/100BaseT),
Twinax/Coax, RS422/485, USB Adapter
RS232C, IEEE1284 (ECP), Wireless
Ethernet (802.11g), LAN (10/100BaseT),
Twinax/Coax, RS422/485, USB Adapter
Std: IEEE1284 (ECP), RS232C, USB (2.0)
Opt: Wireless Ethernet (802.11g), LAN
(10/100BaseT)
Protocols
UHF
UHF & HF (multi protocol)
UHF
SATO’s patent pending “FlagTag™” applicator tamp pad is specifically designed for
automatic print & apply applications. This patent pending tamp pad assembles and
applies a RFID “FlagTag™” after it is encoded, verified & printed on a SATO RFID
S-Type print engine. The “FlagTagSolution™” integrated in RFID label applicators
provides free air-like RF performance for RFID case and pallet labeling.
SATO America, Inc.
10350-A Nations Ford Road, Charlotte, NC 28273
Phone: (704) 644-1650 Fax: (704) 644-1662
E-mail: satosales@satoamerica.com
www.satoamerica.com
© 2007 SATO America, Inc. All rights reserved. Specifications subject to change without notice. Rev. 07/07b
SATO Patent Pending “FlagTag™” Applicator Head
SATO “F
lAg
T
Ag
S
OluTiOnS
™” A
S
E
ASy
A
S
1 • 2 • 3
Application of “FlagTag™” labels is easy as 1 • 2 • 3.
Just remove the part of the label with the RFID antenna,
fold over at the perforated line and the label is ready to
apply!