Acer H7530D Manual De Usuario

24

En

gl

ish

Note: When PIP function is activated, zoom and keystone function 
is unavailable.

User password

Press 

 to setup or change the "User Password".

Press number keys to set your password on the remote control 
and press "MENU" to confirm. 

Press 

 to delete character.

Enter the password when you see "Confirm Password" 
displayed.

The password should be between 4 and 8 characters long.

If you select "Request password only after plugging power 
cord", the projector will prompt the user to enter the 

password every time the power cord is plugged.

If you select "Always request password while projector turns 
on", the user has to enter the password every time when the 

projector is turned on.

Administrator Password
The "Administrator Password" can be used in both the "Enter 

Administrator Password" and "Enter Password" dialog boxes.

Press 

 to change the "Administrator Password".

The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to 

retrieve the administrator password:

An unique 6-digit "Universal Password" which is printed on 
the Security Card (please check accessory in the box). This 

unique password is the number which will be accepted by 

projector anytime no matter what the Administrator 

Password is.

If losing this security card and number, please contact with an 
Acer service center.

Reset

Press the 

 button and choose "Yes" to return the 

parameters on all menus to the factory default settings.

PIP

Choose "On" to see two screens at the same time.

Choose "Off" to disable the function.

PIP Source

Press 

 and 

 to choose the secondary video source: 

Composite, S-Video or Component signal.

PIP Location

Choose the PIP secondary signal location on the display screen.

PIP Size

Choose the PIP secondary signal size on the display screen.