Acer al1711 Guía Del Usuario

 

11

 

 

   
Plug & Play DDC1/2B Feature 
 
This monitor is equipped with VESA DDC1/2B capabilities according to the 
VESA DDC STANDARD. It allows the monitor to inform the host system of its 
identity and, depending on the level of DDC used, communicate additional 
information about its display capabilities. The communication channel is 
defined in two levels, DDC1 and DDC2B. 
The DDC1 is a unidirectional data channel from the display to the host that 
continuously transmits EDID information. The DDC2B is a bidirectional data 
channel based on the I²C protocol. The host can request EDID information 
over the DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS 
NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE 
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. 
 
This monitor meets the Green monitor standards as set by the Video 
Electronics Standards Association (VESA) and/or the United States 
Environmental Protection Agency (EPA) and The Swedish Confederation 
Employees (NUTEK). This feature is designed to conserve electrical energy 
by reducing power consumption when there is no video-input signal present. 
When there is no video input signal this monitor, following a time-out period, 
will automatically switch to an OFF mode. This reduces the monitor's internal 
power supply consumption. After the video input signal is restored, full power 
is restored and the display is automatically redrawn. The appearance is similar 
to a "Screen Saver" feature except the display is completely off. The display is 
restored by pressing a key on the keyboard, or clicking the mouse. 
 
USING THE RIGHT POWER CORD : 
 
The accessory power cord for the Northern American region is the wallet plug 
with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for 
the power cord shall be 125 volts AC. 
Supplied with units intended for connection to power outlet of personal 
computer: Please use a cord set consisting of a minimum No. 18 AWG, type 
SJT or SVT three conductors flexible cord. One end terminates with a 
grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration. 
The other end terminates with a molded-on type connector body, rated 10A, 
250V, having standard CEE-22 female configuration. 
Please note that power supply cord needs to use VDE 0602, 0625, 0821 
approval power cord in European counties.