Acer al1714 Guía De Instalación

Note: Read the [Safety Rules] section carefully before starting the installation 

Before installing your LCD display, consider the following with reference to the space where the 
display is to be installed: 

 

 

 

To minimize the reflection of the display, protect your eyes and ensure premium quality, 
don’t install your LCD display near windows or with backlight. Keep the display away from 
your eyes at least by 30 cm. 

The upper edge of the display should be a little higher than your sight. 

Adjust the front and back dip angles of the display based on your visual angle so that you 
can view the display comfortably. 

Complete the following steps for quick installation: (See the figure) 

 

Take the seat out of the box

 and place it on a flat table. 

 

Take your LCD display out of the carton and assemble the 
display and seat along the rail. You will hear a click sound 
when the display and seat are engaged correctly. 

 

 

Make sure that the power supply of your PC is turned off 
and the power plug is removed. 

 

Connect and fasten both ends of the signal cable to your 
PC host and LCD display respectively. 

 

If your LCD display has built-in speakers, connect the audio 
cable attached to the display from the sound card output of 
your PC to the audio input on the back of your LCD display.

 

Connect the attached power cable to your LCD display. 

 

Plug the power cable to the receptacle. 

 

Turn on the power supplies of your PC and LCD display. 

 

 Signal Cable 

 Audio Cable 

  Transformer DC end 

2