Acer al1913 Guía De Instalación Rápida

   

 

Note: Read the [Important] section carefully before starting the installation 

Complete the following steps for quick installation: (See the figure) 

 

Take out the seat out of the box

 and place it on a flat 

table. 

 

Take your LCD display out of the carton and assemble 

the display and seat along the rail. You will hear a click 
sound when the display and seat are engaged correctly. 

 

 

Make sure that the power supply of your PC is turned off 
and the power plug is removed. 

 

Connect and fasten both ends of the signal cable to your 
PC host and LCD display respectively. 

 

If your LCD display has built-in speakers, connect the 
audio cable attached to the display from the sound card 
output of your PC to the audio input on the back of your 
LCD display. 

 

Connect the attached power cable to your LCD display. 

 

Plug the power cable to the receptacle. 

 

Turn on the power supplies of your PC and LCD display. 

 

X

 

Transformer DC end 

Y

 

Audio Cable (Optional) 

Z

 

DVI Signal Cable (Optional)

[

 

D-Sub Signal Cable

 

 

 

 

     

1 

 

Power Source 

Power On/Off 
Green indication: Power is on and normal 
Orange indication: Sleep status in the energy-saving 
mode 
Colorless indication: Power off 

2.  Menu 

OSD Menu 

Press this button to enter OSD. Press it again to exit OSD.

3 > 

Plus 

4 < 

Minus 

Press this button for selection or adjustment when OSD is 
started. 
Press this button and click <    and    > to adjust volume 
when OSD is not started (for the model with speakers 
only) 

5 Auto 

Automatic 
Adjustment 

Press this button to exit the manual when OSD is started. 
Press this button for the display to optimize the position, 
phase and clock pulse automatically when OSD is not 
started. 

6  Speaker  (For the model 

with speakers)