Acer al2251w Guía Del Usuario

 

4

POWERCORD  

Power Source: 

1. Make sure that the power cord is the correct type required in your area. 

2. This LCD monitor has an External universal power supply that allows operation in 

either 100/120V AC or 220/240V AC voltage area (No user adjustment is 

required.) 

 

NOTES 

A certified power supply cord has to be used with this equipment. The relevant 

national installation and/or equipment regulations shall be considered. A certified 

power supply cord not lighter than ordinary polyvinyl chloride flexible cord according 

to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm

2

) 

shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 

60245 (designation H05RR-F 3G 0.75mm2) shall be used. 

Installing the wall mounting bracket (not included) 

This monitor display can be connected to the wall mounting bracket that is sold 

separately. Please see the following diagram for information on how to disconnect it 

from the power cable and fold the monitor:  

Installation of the wall mounting bracket is as follows: 

 

Method a: Place the wall mounting bracket on the underside of the monitor. Attach 

      to monitor through the holes in the bracket and on the underside of monitor;  

            Attach (10cm X 10cm) as shown in figure a. Place four screws into the holes as 

      

            shown and tighten;  Place four screws into the holes as shown and tighten;

 

      

2.   Re-connect the cable. For instructions on how to attach the monitor to the wall,   

 

  see the Users’ Manual included with the wall mounting bracket;(This product is 

not provided with wall mounting bracket, which is sold seperately)

      3.   Fighre c shows how the bracket should sit against the wall; 

 

                         a                                     b                                       c 

 

3.    Connect  the  AC-power  cord  into  your  LCD  monitor’s  External  Adapter  input 

socket,  and  then  plug  the  other  end  of  External  adapter  to  LCD  monitor’s  DC-

power-input. The AC-power cord may be connected to either a wall power outlet 

or  the  power  outlet  socket  on  your  PC,  depending  on  the  type  of  power  cord 

supplied with your LCD monitor. 

 

 
 
 
 
 
 

 

1.The monitor can be hung from the wall by either of the two following methods: 

     Method b: Line up the large part of the notch (18.5cm X 6.0cm) at the bottom of the monitor
                      with the wall mount and press down until the smaller part of the notch locks firmly 

      

                      into place, as in Figure b below

.