Acer al2416w Guía Del Usuario
5
Interface for Arm Applications
Before installing to mounting device, please refer to
Fig.1-2.
The rear of this LCD display has four integrated 4 mm, 0.7
pitches threaded nuts, as well as four 5 mm access holes in
the plastic covering as illustrated in Figure 1-3. These
specifications meet the VESA Flat Panel Monitor
Physical Mounting Interface Standard (paragraphs 2.1
and 2.1.3, version 1, dated 13 November 1997).
Fig.1-2.
The rear of this LCD display has four integrated 4 mm, 0.7
pitches threaded nuts, as well as four 5 mm access holes in
the plastic covering as illustrated in Figure 1-3. These
specifications meet the VESA Flat Panel Monitor
Physical Mounting Interface Standard (paragraphs 2.1
and 2.1.3, version 1, dated 13 November 1997).
Figure 1-3
Connecting the Display
1. Power off your computer.
2. Connect one end of the signal cable to the LCD
2. Connect one end of the signal cable to the LCD
Monitor’s D-SUB or DVI (option) port.(See Fig 1-4)
3. Connect the other end of the signal cable to the D-SUB
or DVI (option) port on your PC.
4. Make sure connections are secure.
Figure 1-4
Connecting the AC Power
1. Connect the power cord to the LCD Monitor.
(See Fig. 1-5)
2. Connect the power cord to an AC power source.
Figure 1-5
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.