Acer al2423 Instruccion De Instalación

 

 

6 

Connecting the devices 
 

 

Caution: Make sure that the computer and the monitor are both disconnected from the power 
supply. 

 

 

 
 

1 

Power cord 

Attach the monitor to the power cord, and then insert the power cord into a 
properly grounded electrical socket. 

2 

VGA cable   

Connect the signal cable to the VGA input socket of the monitor, and connect the 
signal cable to the VGA output socket of the graphics card on the computer. Then 
tighten the thumbscrews on the connector. 

3 

DVI-D cable    Connect the signal cable to the DVI-D input socket of the monitor, and connect the 

signal cable to the DVI-D output socket of the graphics card on the computer. Then 
tighten the thumbscrews on the connector. 

4 Audio 

cable 

 

Connect the audio input socket (AUDIO IN) of the LCD monitor and the computer 
by means of the audio cable. 

5 

Power switch  On / off 

 
 

 

WARNING! 
Check the VGA card of your computer. Make sure the shape of the plug matches the shape of 
the socket it is inserted into. Also check that none of the pins are bent or otherwise damaged. 
 

 

 
Switching the power 
 
First, switch on the hard-switch on the backside of monitor, then turn on PC and power button on 
monitor’s control panel. When you see the LED on the power button go green, this indicates the computer 
is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light 

VGA 

DVI-D