Acer al702 Manual De Usuario

AL702    11

1. Press MENU key to activate the OSD menu, when OSD is not displayed.

2. Use Select   key to move down through the menu cyclically. The parameter  will be

highlighted when selected.

3. Then use + or - to increase or decrease the value of the parameter, or make selection

between different options.

4. To quit the OSD screen at any time during the operation, press MENU key. If no keys

are pressed for a time period, the OSD automatically disappears.

5. When OSD is not displayed, press + key to start Auto-Adjust.

6. When OSD is not displayed, press - key to turn speaker ON/ OFF.

Brightness

To increase or decrease the brightness.

Contrast

To increase or decrease the contrast.

Analog  Contrast

To  adjust  Contrast  in  the  part  of  analog  input.

Auto Contrast

Press + key to start auto analog contrast.

Color

Temperature

Pressing "- " or "+" to select 9300, 7500, 5500, NATIVE

and USER. Only when selecting USER, you can make
adjustments to the R/G/B content, otherwise not.

Press + and -  simultaneously to restore to factory default

setting.

Auto- Adjust

Press + to turn on this function. The Auto- Adjust will

automatically adjust V-Position, H- Position, Clock, and
Clock-Phase, the whole process takes about 5 seconds.
(Please install the attached LCD monitor utility disk for

Auto- Adjust).

Left/Right

To move the screen toward left or right.

Up/Down

To move the screen upward or downward.

H.Size

To increase or decrease the size of image.

Fine

To increase or decrease the snow noise of the image.