Acer al708 Manual De Usuario
4
Connecting:
1.Power Cord & Power Adapter: Plug one end of the power adapter to the DC power
connector on the backside of the monitor. Plug one end
of the power cord into the power adapter and the other
end into a properly grounded electrical outlet.
of the power cord into the power adapter and the other
end into a properly grounded electrical outlet.
2.VGA Cable (Signal cable): Connect one end of signal cable to monitor and connect the
other side of signal cable to the VGA output of the
graphics card on the computer and tighten the
thumbscrews on connector.
graphics card on the computer and tighten the
thumbscrews on connector.
WARNING: The shape of the D-Sub 15 pin plug of VGA cable is trapezoid.
Make sure it is properly connected to the computer and none of the
pins are bent or pushed in.
pins are bent or pushed in.
3.Audio cable: Connect one end of the audio cable to the audio input of LCD monitor
and the other end to your computer.
Power On:
First, power-on monitor, then power-on computer. After the computer is running, the LED
on the power button should be green. Allow about 10 seconds for the video signal to
appear. If the power LED is not green or you do not see a video signal, check the
connections
on the power button should be green. Allow about 10 seconds for the video signal to
appear. If the power LED is not green or you do not see a video signal, check the
connections