Continental dl1ri-ss Guia De Especificaciones

•Modern, State-Of-The-Art Styling
•Performance Rated, "Plug" Refrigeration

System Utilizing Environmentally Safe R-134a
Refrigerant

•3" High Density, Non-CFC Polyurethane

Foam Insulation

•Chrome-Plated Flow Line Handles
•Cam-Action Lift-Off Hinges
•Self-Closing Doors
•Cylinder Lock in Each Door
•Automatic Hot Gas Condensate Evaporator
•27

3

/

8

" Wide, 66

1

/

2

" High Door Opening

•External Digital Thermometer
•Removable Stainless Steel Rack Guides
•Magnetic Snap-In Door Gaskets
•Unique Air Flow Distribution Ducts Keep Pan 

Product at Uniformly Constant Temperatures

•Removable Stainless Steel Ramps

•Roll-Thru

•Glass Door

•Remote

•Consult Factory

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

A "performance rated", air-cooled hermetically sealed,
capillary type refrigeration system is installed on the top
of each refrigerator.  Plasticized fin coil and air circulat-
ing fans are contained within a concealed "plug" type
insulated housing, readily accessible on the top of the
cabinet and separate from the food zone to increase
food storage capacity.  The entire "plug" system is fully
charged with environmentally safe R-134a refrigerant
and mounted on a sturdy steel, rail type base, which
can be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38 to 40
degrees Fahrenheit (3-5 degrees Centigrade) while
operating with an unrestricted air supply in a maximum
ambient temperature of 100 degrees Fahrenheit.  All
condensate water is evaporated by an automatic, non-
electric, corrosion-resistant condensate evaporator.  A
strict quality-assurance team inspects all materials and
components to the most exacting standards.  All mod-
els are factory performance-tested for a minimum of 16
hours prior to crating.

All materials are of top quality, and are
assembled under rigid supervision conform-
ing to strict quality assurance requirements.
The cabinet front, doors, and interior bottoms
are constructed of heavy gauge polished
stainless steel for durability.  All cabinet joints
and seams are sealed vapor tight.  Case is of
all metal welded construction and is internally
supported and braced for rigid unit construc-
tion.  Cabinet design eliminates overlapping
panels with raw edges.  Cabinet body and
doors are insulated with non-CFC, foamed in
place polyurethane foam with an average
thickness of 3 inches to ensure increased
energy efficiency.  Full-length louvered air
grille located above the doors allows equal air
circulation to the condensing unit.  Easily
removable, low-wattage, anti-sweat door
heaters concealed by a non-metallic, non-
conductive, high-impact thermal breaker strip
eliminate condensate build up on the cabinet
front.  Automatic interior lighting is controlled
by door openings.  Cabinets are equipped
with an easily removable stainless steel ramp
and interior rack guides.

Doors shells are constructed of a heavy
gauge stainless steel and are internally
braced and urethane foam insulated for
rigidity.  Door corners are of welded con-
struction and polished.  Replaceable
snap-in door gaskets are self-adjusting,
heavy-duty, magnetic type.  Doors han-
dles and hinges are chrome-plated and
non-corrosive.  Doors are provided with
built-in cylinder locks, which are keyed
alike.  Hinges are cam action, lift-off type
featuring a positive safety stop at 120
degree