Revel m20 Guía Del Usuario
• Optimum timbre and imaging precision is obtained with the
loudspeakers pointing almost directly toward the prime listen-
ing position. Some listeners prefer a wider “soundstage,” which
is achieved by reducing the toe-in angle, perhaps to the point of
aiming the loudspeakers straight ahead.
ing position. Some listeners prefer a wider “soundstage,” which
is achieved by reducing the toe-in angle, perhaps to the point of
aiming the loudspeakers straight ahead.
• Imaging and a sense of spaciousness will improve as the
loudspeakers are moved away from the wall behind the loud-
speakers and the side walls.
speakers and the side walls.
NOTE: You may then need to move the listening position back to
maintain the best stereo image.
maintain the best stereo image.
• For more bass reinforcement, try moving the loudspeakers closer
to the front wall or corners (also see Room Acoustics on next page).
NOTE: You may then need to move the listening position forward
to maintain an acceptable stereo image.
to maintain an acceptable stereo image.
• For best results, make sure there are no objects between the
REVEL PERFORMA M20 loudspeakers and the intended lis-
tening area (e.g., a coffee table in front of the listener will degrade
timbre and imaging). If possible, avoid placing the loudspeakers
near large objects, which can cause unwanted reflections.
tening area (e.g., a coffee table in front of the listener will degrade
timbre and imaging). If possible, avoid placing the loudspeakers
near large objects, which can cause unwanted reflections.
• REVEL PERFORMA M20 loudspeakers can be also be placed
on bookshelves or in a custom wall unit.
• Ideally, the listening room should be acoustically neutral, nei-
ther producing any distinct echoes nor sounding completely
“dead” and lifeless (also see Room Treatment on the next page).
“dead” and lifeless (also see Room Treatment on the next page).
REVEL PERFORMA M20
Owner’s Manual
11