Panasonic SV-AV100 Guía Del Usuario

Descargar
Página de 100
UQ
≥As formatting erases all the data, save the 
necessary data on a personal computer, 
etc. beforehand.
≥Format may take a little time. Wait until the 
Card Access Lamp goes out. 
device (
54)
≥Read the Operating instructions of an 
external device before connecting SD 
Video Camera.
≥When connecting, turn the power [OFF].
≥Part of the characters may be clipped on 
the screen, depending on the type of TV.
55)
≥Pictures containing the copy-protect signal 
(copy guard) cannot be recorded.
≥A wide-format picture (picture of 16:9) 
cannot be recorded properly.
≥For audio of MPEG4 motion image 
recording, the signals from the L (left) 
channel and the R (right) channel for 
stereo are mixed for recording in 
monaural.
≥Do not plug in or pull out the video or 
audio cord during recording. The 
recording may not be performed correctly.
≥For pictures containing both the main 
audio and sub audio to MPEG4 motion 
image recording, select either channel 
before recording. Otherwise, you will not 
be able to select on TV either of the main 
audio or sub audio. (Both audio channels 
are mixed for recording.)
≥If pictures are recorded when TV 
broadcasting signals are weak or pictures 
are affected by noise, they may be 
distorted or may not even be played back.
≥When recording pictures from other than 
an external device, select [Input Source] 
on [Record Functions Setup] to 
[CAMERA].
57)
≥You can save files on the Hard Disk by 
connecting to the DVD Video Recorder 
with the supplied AV cable. However, the 
picture quality is deteriorated.
≥To erase pictures that you recorded on the 
Memory Card by using the SD Video 
Camera, be sure to erase them on the SD 
Video Camera or by the MediaStage for 
AV100 (supplied), not on a personal 
computer (the explorer, etc.).
≥You may not be able to properly play back 
on the SD Video Camera after editing the 
recorded data or changing the image data 
on a personal computer. 
≥Motion Image format (MPEG4) that can be 
played back on the SD Video Camera is 
ASF. (Depending on the file, it may not be 
able to be played back even if it is in ASF 
format.)
≥When you operate the SD Video Camera 
using its buttons, pull out the USB cable. 
(The SD Video Camera cannot be 
operated in the [PC ACCESSING] mode.)
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the 
SD Video Camera is connected to the 
personal computer.
≥If the SD Video Camera’s personal 
computer peripheral mode 
([PC ACCESSING] is displayed) is not 
cancelled when the personal computer is 
turned OFF, remove the USB cable.
≥If the personal computer switches to the 
suspend mode when the SD Video 
Camera is connected to it, the personal 
computer may not recognize the SD Video 
Camera when it reverts to normal mode. 
In this case, restart the personal 
computer.
≥While MediaStage for AV100 (supplied) is 
accessing a CD, the CD may not work 
properly in other applications.
AV100PP.book  84 ページ  2003年8月22日 金曜日 午後4時30分