Panasonic SV-AV100 Guía Del Usuario

Descargar
Página de 100
UT
1-4: Please check the capacity of a card, 
and when there are few capacities, 
delete unnecessary data.
2:
MPEG2 motion image recording 
does not start although power is 
supplied to the SD Video Camera 
and the Memory Card is correctly 
inserted.
2:
You cannot record MPEG2 motion 
images on some cards. (
27)
Playback
1:
Recorded MPEG4 motion images 
are not clear.
1:
Is [Quality] on the menu set to [NORM] 
or [ECO]? If recording is done with it 
set to [NORM] or [ECO], images with 
fine details may include a mosaic-like 
pattern. Set [Quality] to [FINE] or 
[S-FINE]. 
2:
Playback images do not look 
normal.
2:
The picture may be damaged. In order 
to prevent the loss of image data, 
backing up on a personal computer is 
recommended.
3:
Actual recording time/still image 
storage capacity in the Memory 
Card is different from those 
described in these Operating 
Instructions drastically.
3-1: Actual recording time/still image 
storage capacity depends on the kind 
of the image.
3-2: When motion image data and still 
picture data are recorded in the 
Memory Card, less capacity in the 
Memory Card can be used.
4:
Even if a Memory Card is formatted, 
it cannot be used.
4:
Either the SD Video Camera or the 
Memory Card may be damaged. 
Please consult your Panasonic dealer.
5:
Playing back or recording do not 
function and the screen has frozen.
5:
Set the Power Switch to [OFF]. If the 
SD Video Camera is not turned off 
after setting to [OFF], unplug the AC 
Adaptor and remove the battery.
6:
Sound is not heard while a still 
picture is played back.
6:
Sound is not presented in the Still 
Picture mode (recording or playing 
back of still pictures).
7:
No images are displayed on TV, 
although the SD Video Camera is 
connected to a TV.
7-1: Connect the SD Video Camera to the 
TV correctly.
7-2: Use the supplied AV cable.
7-3: When the SD Video Camera is set to 
Recording mode.
Others
1:
Something is wrong with the SD 
Video Camera’s operation. The SD 
Video Camera is turned on but no 
functions operate.
1:
Press the [RESET] Button on the SD 
Video Camera with a pointed object. 
(Camera reverts back to factory 
settings, but the date/time setup is 
retained.) If this does not solve the 
problem, first disconnect the power 
supply and wait for a minute or so, and 
then reconnect the power supply to 
turn the power back on. (If the above 
operation is performed when the 
Access Lamp of Memory Card Slot is 
lit, the data on the Card may be 
damaged.)
AV100PP.book  87 ページ  2003年8月22日 金曜日 午後4時30分