Panasonic PV-DF2703 Guía Del Usuario

Play fails to start even 
when PLAY is pressed...

•  This unit cannot play discs other than DVDs, Video CDs and CDs.
•  The disc may be dirty and require cleaning.

Play starts but then 
stops 
immediately...

•  Be sure disc is installed with label side up.

Picture is distorted 
during rapid advance or 
rapid reverse...

•  The picture will be somewhat distorted at times: this is normal. 

No Forward/Reverse 
search play...

•  Some discs may have sections which prohibit Forward/Reverse search. (P. 21)

Play does not start even 
when title is selected...

• Confi 

rm the “DVD LOCK” setting. (P. 59)

Audio soundtrack and/or 
subtitle language is not 
the one selected at the 
initial settings...

•  If the audio soundtrack and/or subtitle language selected at DVD initial settings 

does not exist on the disc, it will not be accessible.

No subtitles...

•  Subtitles appear only when available on disc.
•  Select “ON” at the “Subtitle language” section (P. 48) to display subtitles.

Alternative audio 
soundtrack 
(or subtitle) language 
cannot be selected...

•  Alternative language cannot be selected with discs which do not contain more than 

one language.

•  For some discs, alternative language cannot be selected with the AUDIO or SUB 

TITLE button. Try selecting it from the DVD MAIN MENU if available.

Angle cannot be 
changed...

•  This function is dependent on software availability. Even if disc has multiple angles, 

they may be recorded for specifi c scenes only (ANGLE Indicator on unit lights up). (P. 
49)

Video cassette cannot 
be inserted...

•  Insert the cassette window side up; record tab facing you.

Video cassette cannot 
be removed...

•  Completely insert Power Plug into an AC outlet.

Eject does not function 
or insertion cannot be 
done...

•  Turn the POWER off and then on, and try ejecting or inserting the tape again.

Video cassette ejects 
when a recording is 
started, or the power is 
turned off for timer 
recording...

•  Make sure cassette record tab is intact. (P. 4)

The disc cannot be 
removed...

•  First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip, etc.) and, 

applying moderate force, insert it straight into the hole at the base of the tray. The 
tray will eject a little. Now, pull the tray all the way out and remove the disc. (P. 10)

In Stop mode, the VCR 
motor (CYLINDER) 
continues to rotate..

•  To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes. 

This reduces response time from Stop to Play mode and from Play to Rewind Search 
mode.