Panasonic th-50pf50 Guía Del Usuario

0 

0 
0 

1/2

SOUND 

NORMAL 

NORMALIZE 

STANDARD 

OFF 

TREBLE 

AUDIO MENU 

BALANCE 

BASS 

0 

MID 

SURROUND 

Press to display the SOUND menu.

Press to select the menu to adjust.

Select the desired level by listening to the sound.

Press to exit from adjust mode.

Select to adjust each item.

While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION 
(  ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

NORMALIZE 

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)

2/2

SOUND OUT

LEFT CHANNEL
RIGHT CHANNEL

CHANNEL 1
CHANNEL 1

OFF

LEVEL METER

OFF

SDI SOUND OUTPUT

Selects left audio channel.

Selects right audio channel.

ON:  Enables audio output.

OFF:  Disables audio output.

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 4 channels 

each on both right and left sides of the display.

OFF:  Hides the audio level meter.

1-8CH:  Displays the audio level meter (1-8ch)

9-16CH:  Displays the audio level meter (9-16ch)

Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.

STANDARD:  Emits the original sound.

DYNAMIC:  Accentuates sharp sound.

CLEAR:   

Attenuates human voice.

Adjusts low pitch sounds.

Adjusts normal sounds.

Adjusts high pitch sound.

Adjusts left and right volumes.

Select ON or OFF.