Billion 5100s Manual De Usuario

 

21

Translation 

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the 

NAT chapter for more details. 

Back 

Click Back to go back to the first wizard screen. 

Next 

Click Next to continue to the next wizard screen. 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 

clients to obtain TCP/IP configuration at start-up from a server. You can configure the BIPAC 

5100S as a DHCP server or disable it. When configured as a server, the BIPAC 5100S 

provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have 

another DHCP server on your LAN, or else the computer must be manually configured. 

The BIPAC 5100S is pre-configured with a pool of 100 IP addresses starting from 

192.168.1.100 to 192.168.1.199 for the client machines.   

Verify the settings in the screen shown next. To change the LAN information on the BIPAC 

5100S, click Change LAN Configurations. Otherwise click Save Settings to save the 

configuration and skip to section 3.13.